Welcome to Tavol Group Co.,Ltd
股权代码 Stock Code 307262
You are here: Home » Products » Materials Handling Machinery » Electric Forklift » CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift

loading

Share to:
sharethis sharing button

CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift

Tavol CPD20 three-wheel electric forklift: 2000 kg at 500 mm load centre, 4000 mm lift, 1595 mm turning radius, dual 4.8 kW AC drive and a 48 V / 460 Ah lithium battery.
Availability:
Quantity:
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
CPD20 3-Wheel Electric Forklift - 2 Ton Lithium Battery Forklift
  • CPD20

  • TAVOL

Product Description

Overview

Three wheels instead of four is not a cost decision at this size — it is a floor-space decision. The CPD20 turns in a 1595 mm radius and needs a 3291 mm aisle for a 1000×1200 pallet, which is how a 2 tonne truck gets into a warehouse that was laid out for a pallet stacker.

Two 4.8 kW AC drive motors sit on the front wheels, with a separate 12 kW AC lifting motor on the hydraulics. The 48 V / 460 Ah lithium pack weighs 155 kg, charges without a battery room, and holds 15/15 % gradeability loaded and empty. Travel is 14/15 km/h; lift is 360/550 mm/s loaded and empty.

Tavol CPD20 three-wheel 2 ton lithium electric forklift

Tavol CPD20 three-wheel electric forklift — 2000 kg, 4000 mm lift

At a glance

2000 kg
Rated capacity
4000 mm
Lift height
48 V / 460 Ah
Lithium battery
1595 mm
Turning radius
3530 kg
Service weight
4.8 kW × 2
Dual AC drive

Design highlights

01
Turns in 1595 mm
A three-wheel layout pivots on the rear steer wheel, so the truck works a 3291 mm aisle for a 1000×1200 pallet where a four-wheel truck of the same capacity would not fit.
02
Two drive motors, not one
AC 4.8 kW on each front wheel, with a separate AC 12 kW lifting motor — travel and lifting no longer compete for the same power, and gradeability holds at 15/15 % loaded and empty.
03
48 V / 460 Ah lithium
A 155 kg pack with no watering and no battery room: opportunity charging between shifts instead of a fixed charging bay.
04
Instrumentation in the cab
An LCD console with F1–F5 function keys plus H / S / E and diagnostic buttons, so fault codes are read from the seat rather than from a laptop.

Why operators keep choosing it

• 2000 kg at a 500 mm load centre
• 4000 mm lift height, 5000 mm mast extended
• 1595 mm turning radius; 3291 / 3415 mm aisle
• Dual AC drive motors, 4.8 kW each
• 12 kW AC lifting motor, 360 / 550 mm/s
• 48 V / 460 Ah lithium battery, 155 kg
• 14 / 15 km/h travel; 15 / 15 % gradeability
• Solid rubber tyres; hydraulic service brake

Running cost: lithium against diesel

Cost item ICE diesel TAVOL lithium
Energy cost Fuel-price exposure Lower electric energy cost
Maintenance Engine and exhaust service Fewer service items
Worksite impact Noise and emissions Quiet, clean operation

Specification

Data as published in the Tavol CPD20 specification sheet. Lift height, fork length and colour are confirmed on order.

Parameter Value
1.1 Manufacturer Tavol
1.2 Model CPD20
1.3 Power type Battery
1.4 Operation type Seated
1.5 Rated capacity (kg) 2000
1.6 Load centre (mm) 500
1.8 Front overhang (mm) 370
1.9 Wheelbase (mm) 1400
2.1 Service weight incl. battery (kg) 3530
3.1 Wheel type Solid rubber tyre
3.2 Load wheel (mm) 457 × 152 × 308
3.3 Drive wheel (mm) 381 × 127 × 286
3.5 Wheels, front / rear 2 / 1 — three-wheel
3.6 Wheel tread, drive side b10 (mm) 934
3.7 Wheel tread, load side b11 (mm) 183
4.1 Mast tilt α/β (°) 6 / 6
4.2 Lift height h3 (mm) 4000
4.3 Mast extended height h4 (mm) 5000
4.4 Overhead guard height h6 (mm) 1082
4.5 Seat height h7 (mm) 519
4.6 Overall length L1 (mm) 2885
4.7 Length to fork face L2 (mm) 1965
4.8 Overall width b1/b2 (mm) 1120 / 1070
4.9 Fork size l/e/s (mm) 920 / 100 / 40
4.10 Installation level 2A
4.11 Fork carriage width b3 (mm) 970
4.12 Fork outside width b5 (mm) 930–1180
4.13 Mast ground clearance m1 (mm) 105
4.14 Body ground clearance m2 (mm) 100
4.15 Aisle width, 1000×1200 pallet Ast (mm) 3291
4.16 Aisle width, 800×1200 pallet Ast (mm) 3415
4.17 Turning radius Wa (mm) 1595
5.1 Driving speed, load / unload (km/h) 14 / 15
5.2 Lifting speed, load / unload (mm/s) 360 / 550
5.3 Lowering speed, load / unload (mm/s) 500 / 550
5.8 Max. gradeability, load / unload (%) 15 / 15
5.10 Service brake Hydraulic
5.11 Parking brake Mechanical
6.1 Driving motor S2-60 min (kW) AC 4.8 × 2
6.2 Lifting motor S3-15% (kW) AC 12
6.6 Lithium battery (V / Ah) 48 / 460
6.7 Battery weight (kg) 155
7.1 Hydraulic system pressure (MPa) 15.5

Colour, customization & support

Built to your specification
• Yellow / black as shown, or custom colour
• 2000 kg capacity; lift height built to your racking
• 920 / 100 / 40 mm forks, 970 mm carriage
• OEM branding and packaging available
What comes with the machine
• 16-month warranty, longer than the industry standard
• Reply within 24 hours
• Full spare-parts line held for the whole range
• Engineers travel to your market for commissioning and training

Specifications are for reference and may be revised without notice; confirm the final configuration on your order.

Previous: 
Next: 

PRODUCT

• Cranes Machinery 
• Agricultural Machinery
• Materials Handling Machinery
• High-precision sensor
  SALES ONLINE:

CONTACT US

Sales Office: 15F, Guoshan Centre, No 46, Changcheng Road, 
Taian City, Shandong, China  
Tel:0086-538-8520698
Fax: 0086-538-8520697
Website:www.tavolgroup.com 
Mail:sales@tavolgroup.com 

NAVIGATION

INQUIRY
Copyright©2016 All rights reserved, Tavol Group Co.,Ltd 
 support:e-qilai