| Availability: | |
|---|---|
| Quantity: | |
6Ton Self Erection Tower Crane of Hammer head tower
TAVOL
84262000
Product Description
TAVOL — Lifting Solutions Matched to Your Site.Site-matched · Interface confirmed · Delivered as a team · Built to last
Overview
The QTZ80(PT5610) is a topless tower crane rated 6 t maximum load with a 56 m jib and 1.0 t tip load — the numbers a site engineer checks first, because they decide what can be lifted at the far end of the building.
Mast sections are 1.6 × 1.6 × 2.5 mm, free-standing height 40 m and attached height up to 120 m. Hoisting runs at 0–80 / 40 / 20 m/min in three falls, with 37 kW installed power and work duty A4.

TAVOL QTZ80(PT5610) topless tower crane on site
At a glance
| 6 t Max load | 56 m Jib length | 1.0 t Tip load |
| 40 m Free-standing | 120 m Attached height | A4 Work duty |
Design highlights
Why operators keep choosing it
| • 6 t maximum load • 56 m jib with 1.0 t tip load • Mast 1.6 × 1.6 × 2.5 mm, free-standing 40 m • Attached height up to 120 m | • Hoisting 0–80 / 40 / 20 m/min • Installed power 37 kW • Work duty A4 • Foundation plan and erection guide included |
Specification
Standard QTZ80(PT5610) data. Final capacity curve, foundation loads and tie-in positions are confirmed per project.
| Parameter | Value |
|---|---|
| Type | QTZ80(PT5610) topless tower crane |
| Max load | 6 t |
| Jib length | 56 m |
| Tip load | 1.0 t |
| Mast section | 1.6 × 1.6 × 2.5 mm |
| Free-standing height | 40 m |
| Max attached height | 120 m |
| Hoisting speed | 0–80 / 40 / 20 m/min |
| Slewing speed | 0.6 r/min |
| Trolleying speed | 0–60 m/min |
| Installed power | 37 kW |
| Work duty | A4 |
| Power supply | 380 V / 50 Hz / 3 phase (others on request) |
| Standards | GB/T 5031, GB 5144, CE on request |
Delivered as a project, not a shipment
The five things that go wrong on an imported crane are predictable: the parameters were selected wrong, it does not fit on site, the drawings get revised again and again, acceptance does not pass, and nobody answers when it stops. Every crane ships with the same six-part pack, so those five are answered before they happen.
| No. | Deliverable | What is inside |
|---|---|---|
| 01 | Project conditions sheet | Capacity, span, lifting height, work duty (A3–A6) and local voltage captured in one form before anything is quoted. |
| 02 | Interface & layout pack | Bracket load diagram, runway beam interface dimensions, conductor-bar supply method and end-stop clearance drawings. |
| 03 | Technical configuration freeze | Motors, gearboxes, VFDs and electrical brands locked down, with supply and exclusion lists agreed — no site arguments later. |
| 04 | Manufacturing & factory QC pack | Main girder weld inspection report, pre-assembly test video and CE / inspection certificates. |
| 05 | Installation & spares pack | Box-by-box packing list, step-by-step site assembly guide and the first wear-parts kit shipped with the crane. |
| 06 | Acceptance & maintenance file | Unique serial number, electrical schematics, scan-to-service contact and the scheduled maintenance manual. |
What we need to quote accurately
A crane quoted without these five answers is a guess with a price on it. Send them and the proposal comes back with an interface drawing and a frozen configuration — our standard drawing library covers around 80% of a typical factory crane, which is how a quotation that used to take a week now comes back inside 24 hours.
| Parameter | What we ask for | Why it changes the specification |
|---|---|---|
| Rated capacity | 5 t, 10 t, 16 t, 20 t, 32 t… | Sets the girder section, hoist frame and wheel loads. |
| Span & building clearance | Rail centre to rail centre, plus clear height (m) | Decides girder depth and whether a low-headroom hoist is needed. |
| Lifting height & travel | Hook height and crane travel distance (m) | Sets rope length, drum size and the runway length. |
| Work duty | A3 light / A5 medium / A6 heavy | Changes motor, gearbox and brake sizing — the same capacity can cost very differently. |
| Power supply & environment | Voltage, Hz, phase; indoor or outdoor | Determines the electrical package, enclosure rating and paint system. |
What a documented delivery changes
| For the plant owner | The crane fits the production line instead of forcing it: no cutting beams or adding columns, and an installation cycle shortened by around 50% — faster start of production. |
| For the local engineering partner | A full standard drawing set and factory quality behind you, so proposals are fast, installation is predictable and you can keep taking larger jobs. |
| For the operator & maintenance team | Clearly marked electrical drawings and panel components, bilingual English/Chinese manuals and fault-finding a local technician can follow. |
Configuration, delivery & support
| Built to your specification • Jib length per site • Fixed or travelling base • Climbing cage and tie-in set • OEM branding and export packaging | What comes with the machine • 16-month warranty, longer than the industry standard • Near 20 years of crane manufacturing experience, exported to 50+ countries • Engineered drawings, foundation plan and erection guide issued with every crane • Full spare-parts support from the factory, not from a middleman • Remote engineering support during erection, in English and Chinese |
Specifications are for reference and may be revised without notice; final capacity curve and foundation loads are confirmed per project.