Tavol Model of 5010 Tower Crane shipping to Cambodia

If you have probably seen the news of our company before, You know we have exported many products to Cambodia,of course including tower cranes. Today,I will share our another one set tower crane for our Cambodia client’s project.The tower crane order from our old client ‘s friend’s project,His company is one building construction company too.We received his inquiry in December,2019.We discussed many details for the products and customs,Because the client imported goods first time,so many details need to know clearly,we can understand them.after more than one month many times discussions,we built our good first cooperation for one set of 5010 tower crane.For the order,Thanks our old client’s introduction,and thanks for trust our tower crane quality.The Model’s main parameters as below:

QTZ63-5010 TOPKIT TOWER CRANE

Max lifting capacity:5ton,

Jib length:50m

Tip load::1.0ton@50 m,

Building Height is 92 m

Under Jib height(Lift Height):99.5 m

Total 39 pieces mast and 5 pieces anchorages,

The mast size :1.6*1.6*2.5m .         

Voltage:380V/50HZ/3P ,

Without installation charges

With one Piece of Black Box by free

Air conditioner:include                

Main electric parts: Schneider ,Foundation parts:include

See here, do you have a suitable project, or your friends have similar projects?If you have,welcome you contact us,thanks for you in advance.

 

During the special time,we are very happy to get this order. Although the COVID-19 is ruthless, we have a strong friendship with our customers.When the epidemic in China was serious, the customer sent comfort and they can understand that the goods could not be produced on time .We thank customers again for their understanding,Thanks a lot.

After a month of protection ourself and struggle against viruses,we started working and started production.And we try our best to finished the production for the model of 5010 tower crane.And we shipped it to Cambodia last week. In special times, we will also do special protection.Before loading the goods, we will disinfect each container,so please don’t worry about it,like the picture as below:

And some customers will worry about the goods sliding in the container and causing the goods to break.For this question,please don’t worry about it too.

When we loading,we will place the goods in the container reasonably, and we will use a small wire rope to reinforce the goods on the container hooks.For small parts and electric parts will load into the wooden box.